A8 Quattro Sedan V8-4.2L (AUX) (2001)
/Page-950002.png)
^
Remove impulse wheel for speedometer VSS -G22- from drive flange or bracket.
^
Place bracket on pressure plates VW 401 and VW 402 and press ball bearing out of bracket using punch VW 407.
Installing
^
Install impulse wheel for VSS -G22- (arrow) on drive flange and check installation position.
Notes:
^
The drivers on the impulse wheel must engage in the groove of the drive flange.
^
If necessary, apply Vaseline to contact surface of the impulse wheel in order to keep it in proper position during installation.
