A8 Quattro Sedan V8-4.2L (AUX) (2001)
^
VW 681 Release lever
^
3455 Pressure piece
^
Remove transmission
^
Attach transmission to repair stand or place on flat surface.
^
Pull torque converter out carefully.
^
Remove snap ring (item -2- .
^
Remove sealing ring for torque convertor using release lever VW 681.
Notes:
^
Position the VW 681 lever immediately behind the sealing lip of the seal so that the wavy washer (item -4- is not damaged.
^
Replace the wavy washer if it is damaged.
^
Replace the snap ring if it is damaged.
^
Drive torque converter seal in to stop using pressure piece 3455.
^
Install snap ring in groove.
Notes:
^
The open side of the sealing ring faces the transmission.
^
Coat the outer surface and sealing lip of the sealing ring with a thin coat of Vaseline.
^
Before driving in the sealing ring, it must be assured that the wavy washer (item -4 is installed undamaged.
^
The snap ring must contact the base of the groove.