A8 Quattro Sedan V8-4.2L (AUX) (2001)
/Page-1119004.png)
Adjustment shims table
Drive shaft, centering
^
Push drive shaft with installation tool to the rear until stop.
^
Mark the position of the intermediate mount on the body (arrow -A-)
^
Push drive shaft with installation tool to the front until stop.
^
Mark the position of the center mount on the body (arrow-Be)
^
Center drive shaft -arrow C-:
-
The intermediate mount must be positioned between markings -A- and -B-.
^
Install center mount in center position together with previously established shims with 23 Nm (17 ft. lbs.) (arrow -C-).
^
Remove installation tool.
Continue installation in reverse order of removal but note the following: