A8 Quattro Sedan V8-4.2L (AUX) (2001)
Window Shade: Service and Repair
Sunshade For Door Glass, Removing and Installing
Sunshade For Door Glass, Removing And Installing
Removing
-
Remove trim for rear door.
-
Remove trim strip - 1 - for window channel to side.
-
Remove, if necessary, retaining clip - 4 - for trim strip to separation point between sunshade and door trim.
-
Remove 6 Phillips-head screws - 2 - and remove sunshade. If necessary loosen foam seal at edges.
Installing
Installation is done in reverse sequence, noting the following:
-
Tighten Phillips-head screws - 2 - securely to 1.5 Nm (13 in.lb.).
-
Press trim strip - 1 - for window channel onto retaining clips - 4 - (arrows).