A8 Quattro Sedan V8-4.2L (BFM) (2005)
9
Bolt, 55 Nm
‹› Always replace.
‹› Grease the threads and head seating surface.
10
Securing Plate
‹› Always replace.
‹› Side with writing "rear hinten" points toward the rear.
11
Right Camshaft Gear
‹› When removing and installing, remove the toothed belt. Refer to => [ Toothed Belt ] See: Toothed Belt.
‹› Remove the gear using the puller (T40001) and the claws (T40001/2).
12
Bolt, 10 Nm
‹› Install using locking fluid.
13
Right Rear Toothed Belt Guard
14
Idler Roller
15
Pin Bolt, 9 Nm
16
Bolt, 14 Nm
‹› Strength class 10.9.
17
Coolant Pump
‹› Removing and installing, refer to => [ Coolant Pump ] See: Engine, Cooling and Exhaust/Cooling System/Water Pump/Service and
Repair/Coolant Pump.
18
Gasket
‹› Always replace.
19
Left Rear Toothed Belt Guard
20
Bolt, 10 Nm
‹› Install using locking fluid.
21
Nut, 10 Nm
22
Left Camshaft Gear
‹› When removing and installing, remove the toothed belt. Refer to => [ Toothed Belt ] See: Toothed Belt.
‹› Remove using the puller (T40001) and the claws (T40001/2).
23
Securing Plate
‹› Always replace.
‹› Side with writing "rear hinten" points toward the rear.
24
Bolt, 55 Nm
‹› Always replace.