A8 Quattro Sedan V8-4.2L (BFM) (2005)
-
Grease the threads and head seating surfaces of the bolts for the camshaft gears.
-
Install the bolts far enough so that they can still just be turned and do not tilt.
-
Observe the proper seating of the securing plates on the camshafts.
Before installing the toothed belt, make sure the crankshaft and camshafts are set to TDC cylinder 5:
‹› The large holes - arrows - on the securing plates at the camshaft gears must align on the inside.
‹› The (3242) must be installed in the hole in the upper oil pan.