A8 Quattro Sedan V8-4.2L (BGK) (2006)
-
Turn both rear wheels in one direction at the same time so that the flange makes one complete turn.
-
Mark the largest radial run-out on the outside of the flange with color dot (corresponding to the largest distance from the turning axle).
-
Then remove the previous marking from the flange.
-
Attach the driveshaft => [ Attach the Driveshaft to the
Rear Final Drive. ] See: Service and Repair/Removal and Replacement/01AA,01EA,02XA,0A3A,01VA,09EA,09LA Transmission/Driveshaft From
Rear Final Drive.