A8 Quattro Sedan V8-4.2L (BVJ) (2008)
‹› Removing
-
Open Velcro fasteners - 2 - (Qty. 2).
-
Open clamping strips - 3 - (Qty. 2).
-
Using the awl (V.A.G 1636A) - 6 -, pry the bracket - 4 - out of the plastic clips - 5 -.
-
Remove cover - 1 - from upholstery - 7 -.
‹› Installing
-
Replaced damaged plastic clips.
-
First press retainers of cross braces into plastic clips.
-
Install cover in reverse order of removal.
2 - Velcro fasteners (Qty. 2)
3 - Fastening strips (Qty. 2)
4 - Retainer
5 - Plastic clips
6 - Awl (V.A.G 1636A)
7 - Upholstery
Headrest Guides
‹› For the sake of illustration, headrest guide - 1 - is shown removed.
-
Insert an upholstery needle or screwdriver - 3 - (max. width 2 mm) into hole - 4 - (hole - 4 - is located across from retaining clip for headrest
guide).