A8 Quattro Sedan V8-4.2L (BVJ) (2008)
‹› Torque specification: 15 Nm
‹› Apply a thin coat of Lithium Grease to the threads before installing.
6 - Bushing
‹› Insert in brake caliper housing.
7 - Brake Caliper
8 - Retaining Spring
‹› Observe correct installed position.
‹› Hook in at both brake caliper housing studs and at the outer brake pad retaining spring.
9 - Protective Cap
‹› Do not damage when installing piston.
‹› Coat with Assembly Paste.
10 - Pistons
‹› First apply thin coat of brake cylinder paste on piston.
‹› Allocation, refer to => [ Brakes ] See: Specifications/Brakes.
11 - Seal
‹› Coat with Assembly Paste.