A8 Quattro Sedan V8-4.2L (BVJ) (2008)
![background image](/audi/a8_quattro_sedan/v8-4.2l_(bvj)/Page-1012008.png)
-
Remove bolt - 2 - and remove right exhaust manifold from below with catalytic converter toward front.
‹› Ignore - 1 -.
Installing
‹› Tightening specifications. Refer to => [ Exhaust Manifold Assembly Overview ] See: Exhaust Manifold/Service and Repair/Exhaust Manifold
Assembly Overview, => [ Left exhaust manifold tightening sequence ] See: Exhaust Manifold/Service and Repair/Exhaust Manifold Assembly
Overview, => [ Individual components of suspension, right
side ] See: Exhaust Manifold/Service and Repair/Exhaust Manifold Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Replace gasket and self-locking nuts.
-
Place new gasket onto stud bolts.
-
Insert exhaust manifold in securing strips and tighten => [ Left exhaust manifold tightening sequence ] See: Exhaust Manifold/Service and
Repair/Exhaust Manifold Assembly Overview.
-
Install torque support and torque support bracket. Refer to => [ Subframe Mount Assembly Overview ] See: Engine/Service and Repair/Subframe
Mount Assembly Overview.
-
Install right front muffler. Refer to => [ Right Front Muffler ] See: Muffler/Service and Repair/Right Front Muffler.
-
Install engine support with engine mount. Refer to => [ Subframe Mount Assembly Overview ] See: Engine/Service and Repair/Subframe Mount
Assembly Overview.