A8 Quattro Sedan V8-4.2L (BVJ) (2008)
Fuel Gauge Sender: Service and Repair
Fuel Level Sensor 2, Right Lever Sensor
Fuel Level Sensor 2, Right Lever Sensor
Removing
Observe safety precautions. Refer to => [ Safety Precautions ] See: Powertrain Management/Fuel Delivery and Air Induction/Service
Precautions/Vehicle Damage Warnings/Safety Precautions/Fuel Supply System.
Observe rules for cleanliness. Refer to => [ Clean Working Conditions ] See: Powertrain Management/Fuel Delivery and Air Induction/Service
Precautions/Vehicle Damage Warnings/Clean Working Conditions/Fuel Supply System.
‹› To remove the lever-type sensor, fuel tank should be completely empty. Procedure to empty the fuel tank. Refer to => [ Fuel Tank,
Draining ] See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Procedures.
-
Remove the right fuel delivery unit:
‹› Vehicles with MPI engine. Refer to => [ Right Fuel Delivery Unit with Fuel Pump ] See: Powertrain Management/Fuel Delivery and Air
Induction/Service and Repair/MPI Engines.
‹› Vehicles with FSI engine. Refer to => [ Right Fuel Delivery Unit with Fuel Pump ] See: Powertrain Management/Fuel Delivery and Air
Induction/Service and Repair/FSI Engines.
-
Remove right Fuel Level Sensor 4 (G393) (tubular sensor) out of fuel tank.
-
Release the Fuel Level Sensor 2 (G169) - arrow - and pull it off from the mounting.
Installing
-
Insert Fuel Level Sensor 2 (G169) in mount until it engages audibly.
-
Insert Fuel Level Sensor 4 (G393) in fuel tank.
-
Install the right fuel delivery unit:
‹› Vehicles with MPI engine. Refer to => [ Right Fuel Delivery Unit with Fuel Pump ] See: Powertrain Management/Fuel Delivery and Air
Induction/Service and Repair/MPI Engines.
‹› Vehicles with FSI engine. Refer to => [ Right Fuel Delivery Unit with Fuel Pump ] See: Powertrain Management/Fuel Delivery and Air
Induction/Service and Repair/FSI Engines.