A8 Quattro Sedan V8-4.2L (BVJ) (2008)
‹› Tightening specifications. Refer to => [ Coolant Pipes Assembly Overview ] See: Coolant Pipes Assembly Overview, => [ Right heat shield ] See:
Coolant Pipes Assembly Overview, => [ Right driveshaft heat shield ] See: Coolant Pipes Assembly Overview
Installation is in reverse order of removal, note the following:
‹› Secure all hose connections with hose clamps appropriate for the model.
‹› During installation, all cable ties must be re-installed at the same location.
-
Install right cylinder head cover. Refer to => [ Right Cylinder Head Cover ] See: Engine, Cooling and Exhaust/Engine/Cylinder Head
Assembly/Valve Cover/Service and Repair/Right Cylinder Head Cover.
-
Install air filter housing.
-
Fill with coolant => [ Filling ] See: Engine, Cooling and Exhaust/Cooling System/Service and Repair/Procedures.