A8 Quattro Sedan V8-4.2L (BVJ) (2008)
-
Open (VAS 6223/1).
‹› Stripping lever must be located in the lower position - arrow -.
-
Insert fiber optic cable - 1 - into stripping station.
‹› Fiber optic cable must terminate flush to rear side of cutting pliers.
-
Close (VAS 6223/1) until stop and keep closed.
-
Pivot stripping lever upward - arrow -.
-
Open cutting pliers and remove fiber optic cable - 1 -.
-
Detach separated section of insulation from fiber optic cable.
Precision Cutting (Production of Optical End Face)