A8 Quattro Sedan V8-4.2L (BVJ) (2008)
/Page-2761006.png)
‹› In the original vehicle delivery state, the cable is routed beneath bracket - 6 -.
-
Tighten bolts - 1 - and hex nuts - 2 - to Tightening torque:.
-
When upholstering the seat pan, all cover clips must be engaged or installed in the previous locations:
CAUTION!
No one should be in vehicle when connecting battery.
-
Connect battery ground strap.
When installing a new service kit and after each repair on front passenger's seat during which the seat and/or the backrest cover is disengaged, a basic
setting as well as a RE-ZERO procedure must be performed on the passenger occupant detection system control module => [ Additional Passenger
Occupant
Detection Sensor Safety Precautions ] See: Air Bag Systems/Air Bag/Service Precautions.
-
To complete, select the "Airbag" function in "Guided Fault Finding" using.
‹› -J706 Passenger occupant detection system control module basic setting
