A8 Quattro Sedan V8-4.2L (BVJ) (2008)
![background image](/audi/a8_quattro_sedan/v8-4.2l_(bvj)/Page-2291005.png)
-
Bleed the steering system. Refer to => [ Steering System, Bleeding after Reconstructing ] See: Power Steering Bleeding/Service and Repair.
-
Check the power steering fluid level. Refer to => [ Power Steering Fluid Level Checking, Engine Codes BFM, BGK and BVJ ] See: Testing and
Inspection/Component Tests and General Diagnostics/Power Steering Fluid Level Checking, Engine Codes BFM, BGK and BVJ.
-
Check the steering system for leaks. Refer to => [ Steering System, Checking for Leaks ] See: Testing and Inspection/Component Tests and
General Diagnostics/Steering System, Checking For Leaks.
-
Place the vehicle on its wheels. Refer to => [ Positioning Vehicle on the Hoist and on its Wheels ] See: Suspension/Service and
Repair/Procedures/Positioning Vehicle on the Hoist and on its Wheels.
Power Steering Pump Seal and O-ring
Special tools, testers and auxiliary items required
‹› Pulling hook (T20143/1)
‹› Thrust piece (T40052)
Removing
-
Remove the power steering pump. Refer to => [ Power Steering Pump ].
-
Pry the seal out using the (T20143/1).
-
Replace the O-ring - 2 - for the power steering pump input shaft.
Installing