A8 Quattro Sedan V8-4.2L (BVJ) (2008)
![background image](/audi/a8_quattro_sedan/v8-4.2l_(bvj)/Page-1623003.png)
-
Press the inner CV joint off of the axle shaft with the special tools shown in the illustration.
-
Open the small clamp on the axle shaft and remove the CV joint boot from the axle shaft.
Inner CV Joint, Installing
-
Apply sealant -hatched surface- to a clean surface on the inner side of the CV joint boot cover. Sealant bead: Uninterrupted 2 to 3 mm diameter in
the area of the inner holes - arrow -.
-
Use sealant.
-
Slide the CV joint boot with the small clamp onto the axle shaft.