A8 Sedan V8-3.7L (AEW) (1997)
Must only be removed with an empty refrigerant circuit
Version "1" and "2" of A/C housing are different.
Version "2" A/C housings up to January of 2001 are supplied with an evaporator with glued foam seal. As of January of 2001, the seal at
evaporator will be implemented in a running change to an annular rubber seal.
24. Bolt
25. Tube bracket
For coolant tubes to heater core, passenger side
26. Cover for evaporator
27. Tube bracket
For coolant tubes to heater core, driver side
28. Recirculation - flap motor -V113-
Removing and installing See: Air Door/Air Door Actuator / Motor/Service and Repair
29. Cover with recirculating air flap
Removing and installing See: Air Door/Service and Repair
Disassembling and assembling See Fig.1
Fig. 1 Disassembling and assembling cover with recirculating air flap
Fig. 2 Disassembling and assembling intake shaft