A8 Sedan V8-3.7L (AEW) (1997)
Backup Lamp: Service and Repair
High-mount Brake Light, Removing And Installing
CAUTION!
Before beginning repairs on the electrical system:
-
Obtain the anti-theft radio security code.
-
Switch the ignition off.
-
Disconnect the battery Ground (GND) strap.
NOTES:
-
The high-mount brake light is located on the rear shelf.
-
The bulbs -4- (12 V 5 W) are mounted in the bulb assembly -3-.
-
The brake light wiring connector is located on the bulb assembly -3-.
-
The reflector -5- is mounted to the rear shelf by screws located in the trunk.
Removing
-
Remove cover -1- by sliding in direction of arrow.
-
Remove two screws -2- and pull bulb assembly -3- in direction of arrow.
Installing
-
Install in reverse order of removal.