A8 Sedan V8-3.7L (AEW) (1997)
![background image](/audi/a8_sedan/v8-3.7l_(aew)/Page-2030003.png)
-
Remove lower part of function unit.
-
Remove 4 screws - 7 - (2.5 Nm/22 in.lb.).
-
Remove return ring with spiral spring - 8 -.
CAUTION: The return ring with spiral spring must not be turned in removed condition.
-
If return ring with spiral spring is turned one time, determine center position before installing.
-
From center position, return ring with spiral spring must turn to both sides approx. 31/2 rotations.
NOTE: At installation of new return ring with spiral spring remove transport cover - 9 -.