A8 Sedan V8-3.7L (AEW) (1997)
apply Stabilant 22A.
-
Using new bolts and washers Part Nos.: N10 215 27 and N011 524 23, reinstall terminals for each screw with:
^
Largest terminal first (closest to body), then install next smaller terminal, and so on with the smallest terminal last.
^
Tightening torque = 9.5 Nm + 0.5 Nm (7.0 ft lb + 0.4 ft lb).
CAUTION!
Part numbers are for reference only. Always check with your Parts Dept. for the latest parts information.
When procedure applies to vehicles within the New Vehicle Limited Warranty, use the following:
Part Identifier:
9794
Damage Code:
9794 000 01
Labor Operation: 9794512
100TU