A8 Sedan V8-3.7L (AEW) (1997)
Fluid Line/Hose: Service and Repair
ATF Lines, Oil Cooler, Cleaning
Notes:
^
Comply with notes for removing and installing ATF lines.
^
Before installing a replacement transmission, clean the oil cooler and lines using compressed air (max: 10 bar 145 psi).
CAUTION!
^
Always wear safety glasses.
^
Dispose of used ATF properly.
^
Remove bolts -1- and -4-.
^
Remove ATF lines -A- and -B- from transmission.
^
Install hose on end of line -B- and fasten with hose clamp. Put other end of hose in suitable container.
^
Blow compressed air (using air gun) through line -A- several times.
^
Install hose on line -A- and repeat procedure.
^
Reinstall oil lines.
^
Tightening torques