A8 Sedan V8-3.7L (AEW) (1997)
-
Remove carpet (front right) and right side trim of center console -1-
-
Remove bolts -2- (below floor covering) and -3-
-
Slide trim forward and unhook at rear
-
Take hold of front end of air duct for rear cabin ventilation (located behind side trim for center console) and push it aside slightly
-
Inspect locking cable for presence of adjusting piece -arrow- (part number 4D0713299 B, C, D, or E)
-
If adjusting piece (part number 4D0713299 B, C, D, or E) is present, install parts in reverse order; WORK IS COMPLETE
-
If adjusting piece (part number 4D0713299 B, C, D, or E) is not present, proceed to Section B
Section B - Locking Cable Modification
Tip: Locking cable is attached to shift unit (bottom part of selector lever unit) and can be accessed through opening in center console
-
Remove bolt -1-
Tip: Bolt is not re-used
-
Disengage locking cable -2-