A8 Sedan V8-3.7L (AEW) (1997)
Fig. 2 Wire routing on selector lever mechanism
D - Not applicable to vehicles without Tiptronic
E - Connector for shift lock solenoid -N110-
H - Not applicable to vehicles without Tiptronic
Note: Cables must not be routed between the body and the bracket.
Fig. 3 Removing and installing shift lock solenoid -N110-
^
Disconnect selector lever mechanism from body.
^
Disconnect connector -E-.
^
Unlock holding tab -Z- of guard plate from bracket.
^
Remove shift lock solenoid in direction of arrow.
^
After replacing shift lock solenoid, check operation of controls.
Fig. 4 Removing and installing notched plate
^
Remove guide with shutter.
^
Remove bolt -1- and remove notched plate together with spring clip.
^
Move selector lever to "P" position.