audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Torque Converter|Service and Repair > < Campaign - A/T Locking Cable Out Of Position|Page 3292

A8 Sedan V8-3.7L (AEW) (1997)

Page 1
background image

Torque Converter: Specifications

Installation dimension 

If the torque converter is correctly inserted, the distance between the faces of the threaded hole at the torque converter and the contact surface of the
torque converter bell housing is approximately 23 mm (0.91 inch). 
If the torque converter is not fully inserted, this distance is approximately 11 mm (0.43 inch). 

CAUTION!  If the torque converter is not inserted correctly, the driver of the ATF pump will be damaged when the transmission is attached to the
engine.

Torque Converter|Service and Repair > < Campaign - A/T Locking Cable Out Of Position|Page 3292