A8 Sedan V8-3.7L (AEW) (1997)
-
Location: right-rear of transmission
-
Sensor for transmission RPM
-
Checked via OBD
-
Supplies transmission output speed signal
8
-
Selector lever mechanism
-
Location: in center console
9
-
Shift lock solenoid -N110-
-
Location: on right side of selector lever mechanism
-
Can be checked in "Read Measuring Value Block function 08, and by electrical testing
10
-
Throttle Position (TP) sensor -G69-
-
Location: integrated into throttle valve control module -J338-
-
TP sensor signal is sent via ECM to TCM.
-
TP sensor signal is checked by On Board Diagnostic of ECM
-
TP sensor signal can be checked in "Read Measuring Value Block" function 08
-
If a TP sensor malfunction is detected using OBD program, check OBD program of ECM
11
-
Cruise control switch -E45-
-
Location: integrated into steering column switch
12
-
Park/Neutral Position (PNP) relay -J226-
-
Location: relay plate
13
-
Transmission range selector lever display -Y6-
-
Location: in instrument cluster
-
Transmission Range (TR) selector lever display which is completely dark indicates "mechanical backup with non-active control module"
mode
-
TR selector lever display which is completely lit up indicates "mechanical backup with active control module" mode
14
-
Kick down switch -F8-
-
Location: behind spray wall in plenum, integrated into accelerator pedal cable
-
Replacing: replace and adjust accelerator pedal cable
-
Checked via OBD
-
Can be checked in "Read Measuring Value Block" function 08, and by electrical testing
15
-
Brake light switch -F-
-
Location: in pedal cluster
-
Can be checked in "Read Measuring Value Block" function 08, and by electrical testing