A8 Sedan V8-3.7L (AEW) (1997)
8
-
Buffer plugs
-
After installing window glass into guide of door component carrier
9
-
Locking plate
10
-
Backing plate
11
-
Damper washer
Fig. 1 Removing And Installing Front Window
-
Lightly pry locking plate - 1 - using small screwdriver and slide out of groove on guide pin - 4 -.
-
Remove backing plate - 2 -.
-
Lightly pry door window glass from guide pin and remove from vehicle downward.
NOTE: Guide pin will simultaneously push buffer plugs out of door window guide.
-
Remove damper washer - 3 -.
-
When installing, align slot in door window so that it is centered relative to guide pin - 4 -.
Pay attention to contact area on roof frame and at A-pillar.
NOTE: The buffer plug helps seal window and minimize noise. It must be reinserted in the door window guide at the B-pillar after installing the
door window.