A8L V8-4.2L (BFM) (2004)
Antenna Amplifier: Service and Repair
Antenna Amplifier, From 1 September 2008
Radio System
Antenna Amplifier, from 1 September 2008
‹› The Antenna Amplifier (R24)/Antenna Amplifier 2 (R111) are located behind the roof end trim.
‹› Removal and installation of antenna amplifier and antenna amplifier 2 are the same.
-
Switch off all electrical consumers.
-
Remove the key.
Removing
-
Remove the roof end trim.
-
Remove connector for antenna wires - 3 - and - 4 -.
-
Disconnect ground (GND) connection - 2 - (9 Nm).
-
Disengage retaining clips - arrows - on both sides and remove antenna amplifier - 1 -.
Installing
-
Install in reverse order.