A8L V8-4.2L (BFM) (2004)
Alarm Horn
‹› Component location: At front right of plenum chamber beneath side trim.
Removing
-
Switch off ignition and remove ignition key.
-
Remove rubber seal - 1 - on plenum chamber covers.
-
Remove plenum chamber cover - 2 -.
‹› Disregard item - 3 -.
-
Remove bolts - 2 - and - 3 - and remove alarm horn (H12) out of plenum chamber.
-
Disconnect electrical connector - 1 -.
Installing
Install in reverse order.