A8L V8-4.2L (BFM) (2004)
Parking Assist Control Module: Procedures
Control Module For Parking Aid -J446-, Removing And Installing
Removing
-
If control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault Finding" routine.
-
VAS 5051 Vehicle Diagnostic Testing and Information system must be used for this purpose.
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Remove left luggage compartment side trim cover -arrows-.
-
Remove nuts -arrows-.
-
Disconnect electrical connectors -2-.
-
Remove control module -1-.
Installing
Install in reverse order of removal.
Tightening torque
Component
Nm
Control module to body
1.8