A8L V8-4.2L (BFM) (2004)
1
-
Worm gear
-
Tighten to 1 Nm.
-
Allen wrench 6 mm
CAUTION: When installing, a tightening torque of 1 Nm must be observed. Otherwise, worm gear of mounting strip will be
damaged and it will be significantly more difficult to remove the bumper.
2
-
Rear body wall
3
-
Rear bumper cover
4
-
Slider for mounting strip
-
Slider is loosened via rotating worm gear clockwise on both sides.
5
-
Retaining bolts for bumper cover
-
Retaining bolts are locked via slider, and unlocked during installation.