A8L V8-4.2L (BFM) (2004)
/Page-7008001.png)
Hood Weatherstrip: Service and Repair
Hood Seal Assembly Overview
1
Hood Seal
‹› Install seal on both sides on seals - 3 - at left and right.
‹› Press seal onto flange from rear toward front.
2
Plenum Chamber Seal
‹› Install seal on both sides on seals - 3 - at left and right.
CAUTION!
The must not be a gap between the ends of the seal.
‹› Press seal at both sides onto plenum chamber flange.
3
Right/Left Hood Seal
‹› Self-adhesive.
‹› Adhesion surface free of dust and grease.
‹› Remove protective paper before applying.
‹› Position release in passage - 5 -.
‹› Position seal on fender mounting bolt.
