A8L V8-4.2L (BFM) (2004)
5 - Mounting Bracket
Gas Strut, Venting
-
Clamp area - x - of the gas strut in the vise, area - x - = 50 mm.
-
Using saw, cut into cylindrical part of strut at point within first third of cylinder's length (measured from cover edge at piston rod end of cylinder).
CAUTION!
Clamp only within this area, otherwise accident could occur!
‹› Always wear eye protection when sawing. Also, place a cloth over the area to absorb any oil squirting out.
Cable Guide