A8L V8-4.2L (BFM) (2004)
/Page-7206002.png)
1. Cut appropriate sections of the felt strip material and apply to the openings.
In Figures 1 and 2 felt strip material 533 867 910 A has been applied to isolate the mounting clips of the footrest trim.
2. Cut the felt into sections and apply so that the clip can slip through.
The clip now presses on the felt, and the felt covers the metal edges, preventing function noises.
Warranty
Required Parts and Tools
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.
