A8L V8-4.2L (BFM) (2004)
Passenger Assist Handle: Service and Repair
Roof Grab Handle, Removing And Installing
Special tools, testers and auxiliary items required
-
Torque wrench V.A.G 1783
Removing
-
Remove cover panels - 3 - (2x) from underneath.
-
Remove bolts - 2 - (2x).
-
Tightening torque 4 Nm
-
Remove roof grab handle - 1 -.
Installing
NOTE:
-
Always remove remnants of locking fluid from tapped holes for roof grab handle after removing roof grab handle. Otherwise there would be a
danger of new bolts seizing when screwed in and shearing off on renewed disassembly.
-
Cleaning can be performed using a thread cutter.
-
Replace roof grab handle bolts (self-locking).