A8L V8-4.2L (BFM) (2004)
Head Rest: Removal and Replacement
Shade of Center Head Restraint, Removing and Installing
Shade Of Center Head Restraint, Removing And Installing
Removing
-
Remove rear seat bench.
-
Remove rear seat backrest.
-
Remove center head restraint.
-
Remove shade - 2 - on left and right at locations marked - 1 - (2x).
-
Disengage shade - 2 - on left and right at locations marked - 3 - (2x) and remove shade - 2 -.
Installing
-
When installing old shade:
-
Retract shade - 2 -.
-
Hold pin - 4 - with pliers and turn shade 14-15 times in direction opposite to extension direction - arrow -.
-
Press in pin - 4 - and secure pin - 4 - with paper clip for example.
-
Engage shade - 2 - in guides - 1 -. Start on side with locking element.
-
Make sure shade is properly engaged on both sides.
-
Remove locking element - 3 -.
-
Check operation of shade: At least 3/4 retraction