A8L V8-4.2L (BFM) (2004)
Power Seat Motor: Service and Repair
Head Restraint Adjustment Motor, Removing and Installing
Head Restraint Adjustment Motor, Removing And Installing
1
-
Retainer
-
Qty. 2
2
-
Retainer plate with head restraint adjustment motor
Removing
-
Remove head restraints.
-
Remove seat.
-
Attach Fixture for seat repair VAS 6136 to Engine and transmission holder VAS 6095.
-
Attach front seat to Fixture for seat repair VAS 6136.
-
Remove side trim on outboard side.
-
Remove side trim on inboard side.
-
Remove front trim.
-
Remove bracket for seat side trim.
-
Remove backrest.
-
Remove upper backrest cover panel.
-
Remove lower backrest cover panel.
-
Remove head restraint guides.
-
Remove backrest cover and padding.
-
Disconnect connector - 3 -.
-
Remove wiring harness from retainer plate with head restraint adjustment motor - 2 - - Drill out rivets - 4 - (2x).
-
Slide retainer plate with head restraint adjustment motor - 2 - upward out of retainers 1-(2x).
-
Replace retainer plate with head restraint adjustment motor - 2 -.
Installing
-
Install retainer plate with head restraint adjustment motor - 2 - in reverse order of removal.
3
-
Connector
4
-
Rivets
-
Qty. 2