A8L V8-4.2L (BFM) (2004)
/Page-3860004.png)
-
Clamp shearing tool - 3 - in a drill and place it on brake line.
-
Shear coating from brake line at a slow drill RPM and with light pressure against the line.
The length of the sheared-off portion is determined by the stop in the shearing tool.
-
Remove shearing tool from brake line and remove shearing remains.
-
Remove self-grip pliers and tube fitting - D - from brake line.
-
Slide brake line - B - against stop - A - in flaring tool.
