A8L V8-4.2L (BFM) (2004)
/Page-3884002.png)
8 - Guide pins
^
Grease before pulling on protective cap
9 - Protective cap
^
Pull onto brake carrier and guide pin
10 - Brake carrier with guide pin and protective cap
^
Supplied as replacement part, assembled with sufficient grease on guide pins
^
If protective caps or guide pins are damaged, install repair kit. Use grease packet supplied to lubricate the guide pins.
11 - Protective cap
^
Removing and Installing. Refer to Piston For Rear Brake Caliper, Removing and Installing.
See: Disc Brake System/Brake Caliper/Service and Repair/Overhaul/Rear Brake Caliper Piston
^
Pull outer sealing lip onto piston
