A8L V8-4.2L (BFM) (2004)
-
Install the coolant thermostat housing.
Further installation is performed in reverse order of removal, noting the following:
-
Install the toothed belt (adjust timing). Refer to => [ Toothed Belt ] See: Engine/Timing Components/Timing Belt/Service and Repair/Removal
and Replacement/Toothed Belt.
-
Fill the cooling system. Refer to => [ Draining and Filling ] See: Service and Repair/Procedures/Draining and Filling.
-
Install the torque support, refer to => [ Torque Bracket and Support Valve Assembly Overview ] See: Engine/Service and Repair/Torque Bracket
and Support Valve Assembly Overview.
Tightening Specifications
‹› 1) Strength class 10.9