A8L V8-4.2L (BFM) (2004)
‹› For the bearing cap.
‹› Always replace.
‹› Tightening sequence, refer to => [ Crankshaft Bearing Cap, Installing ].
Crankshaft Bearing Cap Identification
‹› Bearing 1 is located on the belt pulley side.
Crankshaft Bearing Cap, Removing
-
Remove the crankshaft bearing cap bolts or nuts.
-
Remove the crankshaft bearing caps from the cylinder block using the puller (T10055).
Allocation of Crankshaft Bearing Shells for the Cylinder Block