A8L V8-4.2L (BFM) (2004)
-
Tighten the bolts - 1 and 2 -.
-
Install the lower oil pan. Refer to => [ Lower Oil Pan ] See: Engine Lubrication/Oil Pan/Service and Repair/Lower Oil Pan.
-
Do not oil the sealing lip and outer edge of the seal before pressing it in.
-
Press in the seal using the (T40007) and the center bolt. Rotate the thrust washer and install it on the crankshaft.
‹› The thrust washer is rotated so that the new sealing ring runs on new sealing path.