A8L V8-4.2L (BFM) (2004)
/Page-2047004.png)
-
Mark the holes according to dimensions - a and b - at the lock carrier as shown.
‹› Dimension - a - = 40 mm.
‹› Dimension - b - = 55 mm
-
Make a 24 mm diameter hole.
‹› The hole must be pre-bored and then drilled to 24 mm using the stepped quick helix drill bit.
-
Unclip the cable clips - arrows -.
-
Remove the bolts - 1 and 2 - for the torque support.