A8L V8-4.2L (BFM) (2004)
Installation is performed in the reverse order of removal, noting the following:
‹› All cable ties which are opened or cut off when removing the engine, must be replaced in the same position when installing the engine.
‹› Secure all hose connections using hose clamps appropriate for the model type.
-
Connect the electrical connector - 1 - to the torque support valve.
-
Install the torque support valve and tighten bolts - 2 and 3 -.
-
Turn the knurled nut - 1 - on the torque support valve clockwise until the stop.
-
Tighten bolts - 1 and 3 - for the torque support.