A8L V8-4.2L (BFM) (2004)
Front Crankshaft Seal: Removal and Replacement
Crankshaft Seal, Belt Pulley Side
Special tools, testers and auxiliary items required
‹› Thrust piece (T40007)
‹› Oil seal extractor (T40019)
Removing
-
Remove the front bumper.
-
Remove the lock carrier.
-
Remove the toothed belt. Refer to => [ Toothed Belt ] See: Timing Components/Timing Belt/Service and Repair/Removal and
Replacement/Toothed Belt.
-
Remove the crankshaft toothed belt gear - 1 - bolt - 2 -.
-
Remove the toothed belt gear.
-
Place the inner part of the (T40019) flush with the outer part and secure it using the knurled screw.
-
Lubricate the threaded head of the (T40019), position and with forced pressure screw it into the oil seal as far as possible.
-
Loosen the knurled screw and turn the inner portion against the crankshaft until the oil seal is pulled out.