A8L V8-4.2L (BFM) (2004)
-
Installation Position See Fig.1
9
Seal
-
Always replace
-
To install, place into opening of fuel tank when dry
10
Fuel Supply Sensor 3 -G237-
-
Gray
-
Clipped in on fuel delivery unit -Item 3-
-
Checking resistance values
Fig. 1 Installation position of left connector flange
-
Insert new, dry seal for connector flange into opening of fuel tank.
-
Insert connector flange in fuel tank, note installation position:
The tab -2- on connector flange must lie between tabs -1- and -3- on fuel tank.