A8L V8-4.2L (BFM) (2004)
Headlamp Control Module: Procedures
Headlight Range Control Module -J431-, Removing And Installing
Location: Behind instrument cluster on support.
Removing
-
If control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault Finding" routine.
-
VAS 5051 Vehicle Diagnostic Testing and Information system must be used for this purpose.
-
Remove instrument cluster.
-
Remove screws -arrows-.
-
Remove bracket -1-.
-
Disconnect electrical connector -2-.
-
Remove nuts -arrows- and remove headlight range control module -1-.
Installing
Install in reverse order of removal.
Tightening torques
Component
Nm
Control module to bracket
2.5
Bracket to instrument panel support 3.0