A8L V8-4.2L (BFM) (2004)
‹› For the ribbed belt.
9
Ribbed Belt Tensioner
‹› To release the tension on the ribbed belt, rotate using a box wrench. Refer to => [ Ribbed Belt ] See: Ribbed Belt.
10
Bolt, 22 Nm
11
Vibration Damper
‹› With the pulley for the ribbed belt.
‹› Removing and installing, refer to => [ Vibration Damper ] See: Engine, Cooling and Exhaust/Engine/Cylinder Block Assembly/Harmonic
Balancer - Crankshaft Pulley/Service and Repair/Removal and Replacement.
12
Lower Idler Pulley
‹› For the ribbed belt.
13
Power Steering Pump Pulley
‹› Removing and installing, refer to => [ Power Steering Pump Pulley ] See: Steering and Suspension/Steering/Power Steering/Power Steering
Pump/Service and Repair/Removal and Replacement.
14
Shim
‹› Different thicknesses.
‹› After replacing the power steering pump, Air Conditioning (A/C) compressor or bracket for the power steering pump and A/C compressor,
determine the shim thickness => check alignment of the ribbed belt. Refer to => [ Ribbed Belt Alignment, Checking ] See: Testing and
Inspection.
15
Power Steering Pump
‹› For the power steering.
16
Bolt, 22 Nm
17
Bolt, 40 Nm
18
Accessory Bracket
‹› For the A/C compressor and power steering pump
‹› Observe the alignment sleeves - item 23 - when installing.
19
Alignment Sleeves
‹› Quantity 2.
‹› Ensure they are seated correctly in the bracket.
20
Bolt, 22 Nm
21
Air Conditioning (A/C) Compressor
‹› Observe the alignment sleeves - item 19 - when installing.
22
Bolt, 22 Nm
23
Alignment Sleeve
‹› Quantity 2.
‹› Check for proper seating.