A8L V8-4.2L (BFM) (2004)
/Page-1710004.png)
-
Remove the center toothed belt guard.
-
Remove the torque support bolt - arrow - from the torque support valve (N382).
-
Remove the bracket bolts - arrows - for the torque support valve.
-
Using an 8 mm hex wrench, rotate the toothed belt tensioner in the - direction of the arrow - until the tensioning lever pushes the tensioning
element together far enough so that the (T40011) can be inserted into the bore of the tensioning element piston and housing.
