A8L V8-4.2L (BFM) (2004)
-
ECM will no longer store DTCs listed above.
1. Remove sound insulation under engine compartment.
2. Remove electrical plug (Figure 2) from right front engine torque support - N382-.
3. Install plug with internal resistor part number 4E0 971 067 A onto the wiring harness.
4. Secure resister to wiring harness with cable tie (obtain locally).
5. Cut off excess cable tie.
6. Install 2 connector caps (part number 3C0 972 841) into electrical connector (part number 1J0 973 702) (Figure 5).