A8L V8-4.2L (BFM) (2004)
-
Switch on ignition.
-
Activate one-touch wiping and let wiper motor run to end position.
-
Check whether crank is positioned between marks and align if necessary.
-
Switch off ignition and remove ignition key.
-
Install the windshield wiper motor. Refer to => [ Windshield Wiper Motor with Windshield Wiper Motor Control Module ] See: Wiper and
Washer Systems/Wiper Motor/Service and Repair/Removal and Replacement/Windshield Wiper Motor With Windshield Wiper Motor Control
Module.
Tightening Specifications